DAVIS Cellular Telephone Antenna Kit - Manual (Page 18)

Page 18 Cellular Telephone Antenna Kit
✦ On the other side of the terminal block, connect the black CTM power wire to ter-
minal 1 (grey), the green CTM power wire to terminal 3 (orange), and the red CTM
power wire to terminal 4 (orange).
The green wire will need to be moved to terminal 2 (green) after you
have tested the installation. Connecting the wire to terminal 3 bypasses
the “power-saver” mode and insures power is applied simultaneously to
the red and green CTM power wires.
✦ Connect the white and black wires from the Timer to the Wht and Blk terminals
(respectively) at B4 on the regulator circuit.
✦ Jumper together the two terminals (Yel and Grn) at B3 on the regulator circuit
using the jumper wire.