DAVIS Cellular Telephone Antenna Kit - Manual (Page 2)

Page 2 Cellular Telephone Antenna Kit
✦ BNC Adapter
✦ Power Adapter, 12V, 2A
✦ Modem RF Cable, co-axial, BNC and Mini-UHF connectors, 12" (30 cm) long
✦ CTM Power Cable, DB25 connector and cable
✦ Modular Cable, 6-conductor, 4' (1.2m) long
✦ Two Tab Adapters
✦ Two Battery Wires (1 red, with in-line fuse holder, 1 black)
✦ Three Alarm Output Module Wires (1 green, 1 yellow, 1 white)
✦ Jumper Wire, yellow
✦ Three #6 Sheet Metal Screws (for mounting modem bracket)
✦ Two #8-32 x 3/4" Machine Screws, Washers, Lock Washers, and Nuts (for mount-
ing antenna)
✦ Two Power Connector Brackets and #6 Screws
✦ Two #4 x 3/8" Machine Screws and Two #4 x 3/4" Machine Screws, Washers, Star
Washers, and Nuts (for mounting hang-up cup)
✦ Four #4 x 3/8" Machine Screws and Nuts (for mounting Timer on terminal plate)
✦ Modem Configuration Disk
Motorola SMCT2 Cellular Telephone Modem Components
The Motorola SMCT2 CTM should include the following components, which
will be necessary for the installation.
✦ Cellular telephone Modem (S5692A)
✦ Mounting Bracket
✦ 4 Adhesive Pads
The CTM should also include a power cable, two wire/fuse loops, one black
wire, and a hardware package, none of which is needed.
Mounting Bracket
and Adhesive Pads
Cellular Telephone
Modem