DAVIS Leaf Wetness Sensor for Vantage Pro2 User Manual
E a f
Advertising
Table of contents
Document Outline
- Leaf Wetness Sensor
- Components
- Tools and Materials Needed
- Installing the Sensor
- Connecting Leaf Wetness Sensors
- Securing Sensor Cables in the Station
- 1. Secure sensor cables to the cable tie mounts located next to the grommets.
- 2. To prevent fraying or cutting of cables, secure them so they will not whip about in the wind. Secure a cable to a metal pole by wrapping electrical tape around them both. Make sure cables are secure by placing clips or ties approximately every 3 ...
- Securing Cables with Clips and Ties
- Note: Do not use metal staples or a staple gun to secure cables. Metal staples — especially when installed with a staple gun — have a tendency to cut the cables.
- Mounting the Sensor