AT&T 205 - Manual (Page 15)

13
Flash
Access special telephone company subscriber
services such as call waiting or 3-way
conference. It may also be necessary to press
other buttons before or after pressing
FLASH,
as explained in the custom calling instructions
provided by your telephone service provider.
When there is a call waiting signal, press
FLASH
to put the current call on hold and connect to
the new call. Press
FLASH again to return to the
original call. Also, press FLASH to activate other
telephone company subscriber services such as
3-way conference.
Redial
This telephone always stores the last telephone
number dialed in its memory. The redial memory
can accept numbers up to 32 digits. The
telephone will remain in memory until another
telephone number is dialed. To dial the same
number again, lift the handset, and press
REDIAL.
Handset volume
Adjust the listening volume on the handset ( LO,
MED or HI).
Dial mode
Select touch tone (tone dialing) or dial pulse
(rotary dialing).
Operation
Handset operation