Apple Workgroup Server 8550 - Manual (Page 19)

2 Connect the monitor’s power cord to the monitor.
On some monitors, the cord is already attached.
3 Plug in the monitor’s power cord to the server or grounded electrical outlet.
Some power cords are designed to plug into the back of your server. You
can also plug the power cord into a grounded electrical outlet (an adapter may
be needed).
Note: If you have an Apple AudioVision monitor, plug the monitor’s power
cord into the back of the server, not into an outlet.
Some monitors have to be connected to a grounded power outlet, not to the
server’s power socket. Check the information that came with the monitor.
Monitor power cord Monitor power socket
10 Chapter 1 / Setting Up Your Server