AT&T Cordless Telephone MLC-6 - Manual (Page 7)

Safety Instructions for
Installation Personnel
WARNING:
This product must be properly grounded. Failure to do so can
result in a risk of electrical shock, which may cause serious
personal injury. Before product installation, verify that you are
installing the equipment at a properly grounded 3-prong AC
receptacle. If not, stop the installation and contact a qualified
service technician.
■ Never install telephone wiring during a lightning storm.
■
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
■ Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
■ Use extreme caution when installing or modifying telephone
lines.
■ This AT&T equipment is designed for installation on
PARTNER™ and PARTNER Plus systems only.
■
All wiring that connects to this equipment and becomes part of
the building wiring must be a minimum of CLASS 2 or U.L.
Listed Communications cable.
SAVE THESE INSTRUCTIONS
4