Dee Zee DZ2544 - Manual (Page 6)

Attach the rocker brackets [E] to the rocker panel with a ribneck carriage bolt [F],
washer [H], and nut [I].
Repeat this for each bracket location.
5
Once the rocker panel brackets are installed, attach the angle braces [K] to the bottom of the brackets
through the long slot in the angle brace using a hex head bolt [G], two washers [H], and a nut [I].
Tighten with 7/16" wrench/socket.
6
DZ 2544 4 OF 8 2/12/2013