Cb inside vertical lip of bed – Dee Zee DZ948 User Manual
Page 5
Advertising

Page 5 of 10
DZ 946 / DZ 948
12/10/12
Remove the wheel well toolbox (A) from the vehicle and examine the marked hole locations on the
inside vertical lip of the bed.
• If the back side of the lip is accessible at marked hole location to allow for installation of a nut
(F) onto bolt (E) through lip then go to STEP 3 BELOW.
• If the back side of the lip is inaccessible at marked hole location then go to STEP 4 BELOW.
2
C
B
Inside Vertical
Lip of Bed
Advertising
This manual is related to the following products: