Dee Zee DZ948 - Manual (Page 6)

Page 6 of 10
DZ 946 / DZ 948 12/10/12
If the back side of the vertical inside bed lip is accessible at marked hole location to allow for
installation of a nut (F) onto a bolt (E) through bed lip then use ¼” drill bit at hole locations.
Secure mounting brackets (B/C) to the inside of the vehicle bed rail using ¼” x ¾” hex head bolts (E),
¼” flat washers (G), and ¼” hex nuts (F). Do not tighten hardware.
3
C
E
(x2)
G
(x2)
F
(x2)
G
(x2)
Inside Vertical
Lip of Bed
1/4” Drill
Bit