Night Owl ADV1-168500 user manual - Manual (Page 45)

44
15.1 Alarm Menu
15.1.1 Motion Menu
The Motion Menu allows you to configure the motion settings on your DVR.
To access the Motion Menu, select the Advanced button, select Alarm
from the list on the left side of the screen, and then select Motion.

CH: Indicates the channel that you will be configuring.

Enable: Allows you to activate motion detection. It is recommended
that you keep this checked.

Sensitivity: Indicates the level of sensitivity of the camera. The
lower the sensitivity, the more motion will be needed to start
recording.

Area: Select Settings to open a new window to block out areas
that may have constant movement such as trees or roads.

Schedule: Select Settings to open a new window that will show
when the DVR is set to record alarms.

Trigger: Select Settings to open a new window that will allow you
to generate different responses by the DVR when motion has been
detected.
Chapter 15: Advanced Menu