Night Owl Poseidon-DVR - Manual (Page 26)

User’s Manual
24
6.2.6 Port Forwarding
To access the DVR from a remote computer over the internet via internet browser (Internet
Explorer).
1. Forward Port 80 and Port 9000 in the router attached to the DVR, to the IP address of the
DVR. *If you can’t use HTTP Port 80 due to use or your Internet Service Provider is
blocking it, use a different port like 1024 as the WEB PORT. When selecting a different port,
forward the new port to the IP address of the DVR and change the settings in the DVR
Network settings. You will also need to add the new port to the end of the IP address in the
browser window. For example, if you use port 1024, you add “:1024” to the end of the IP
address.
2. For instructions on the most popular routers go to www.portforward.com. Click on the
“Routers List” and select your router from the list of router manufacturers by clicking on the
brand and model number.
3. On the next page that opens, click on the “Default Guide” link. This will take you to the
port forwarding instructions for your router.
4. When you access the DVR from a remote computer, you also need to use a different
address in the Internet Explorer browser window. Instead of entering the IP address of the
DVR, you need to enter the public IP address of the router that the DVR Is attached to. You
can get this address by going to
www.myipaddress.com from the computer that
is attached to the same router as the DVR. This website will display the box in that shows
the IP address you need to use.