Night Owl CS-Mini-DVR-4GB - Manual (Page 11)

10
1. To turn on the mini DVR, switch the mode to
“Video” and
turn it on. Your mini DVR will be in standby mode.
2. Press and hold the Start/Stop button for 2 seconds, the
red LED indicator will blink then turn solid green indicating
the mini DVR is on and ready for use.
3. Press the Start/Stop button once. The LED indicator will
turn red to indicate the mini DVR is recording.
4. To stop recording, press the Start/Stop button once again.
The LED indicator turns to green when recording stops.
Chapter 7: Recording a Video
Prior to recording any videos, make
sure that the memory card is properly
inserted into the mini DVR.
Your mini DVR will return to standby mode if not used for
30 seconds. The mini DVR will automatically shut down
when memory card is full.