Night Owl CS-Mini-DVR-4GB - Manual (Page 12)

11
1. To turn on the mini DVR, switch the mode to
“Photo” and
turn it on. Your mini DVR will be in standby mode.
2. Press and hold the Start/Stop button for 2 seconds, the
LED indicator will flash red then turn solid green
indicating the mini DVR is on and ready for use.
3. Press the Start/Stop button once, the LED indicator will
turn red for about one second and then turn back to solid
green after a picture has been taken.
Prior to taking any pictures, make sure
that the memory card is properly
inserted into the mini DVR.
Chapter 8: Taking a Picture
Your mini DVR will return to standby mode if not used for
30 seconds. The mini DVR will automatically shut down
when memory card is full.