AT&T 982 - Manual (Page 23)

19
TELEPHONE MEMOR
Y
TELEPHONE MEMOR
Y
Store a Memory Number
1 Press
K, press h or lift the handset.
2 Press and release
G. You will hear a beep.
3 Enter the telephone number you want to store
(up to 24 digits) or press
a to store
the last number dialed. You will hear a beep each
time you press a button. Press
P to store a
three-second dialing delay.
4 Press and release a memory button
— OR —
Press and release
l, then a memory button.
You will hear a two-beep confirmation tone.
5 Hang up.
Repeat Steps 1-5 to store another number.
If you hear a series of five beeps, an error was made.
Repeat Steps 1-5 in order to repeat the number you
wish to store.
NOTE: You cannot store a pause as the first digit
of a memory number.
Dial a Memory Number
1 Press
L or l.
2 Lift the handset
— OR —
Press
K
— OR —
Press
h and listen for dial tone.
3 Press and release a memory button
— OR —
Press and release
l then a memory button.
Erase a Memory Number
To remove a number from memory, enter another number
in the same location. To clear a memory location and
leave it empty,
1 Press
L or l, then lift the handset.
2 Press
G.
3 Press the button of the memory location you
want to clear.
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
❖ ❖ ❖ ❖ ❖ ❙ ❙ ❙ ❙ ❙
▼ ▼ ▼ ▼ ▼
❘ ❘ ❘ ❘ ❘
▼ ▼ ▼ ▼ ▼
P P P P P
▼ ▼ ▼ ▼ ▼
P P P P P
▼ ▼ ▼ ▼ ▼
❙ ❙ ❙ ❙ ❙
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
982_CIB_3ATT 2/4/05 9:52 AM Page 19