Racing Electronics SC150 - Manual (Page 8)

Key Bank Channel
x
1 1 - 10
y
2 11 - 20
z
3 21 - 30
{
4 31 - 40
|
5 41 - 50
}
6 51 - 60
~
7 61 - 70

8 71 - 80
€
9 81 - 90
€
10 91 - 100
4. In SCAN or SEARCH Mode, press
H
to stop
scanning or searching. (HOLD appears on the
display.) After you stop the scanner, press H
again to resume scanning or searching.
GO TO — Use the numeric keypad to enter a
channel number, and then press
H
(GO TO) to
access that channel.
5. Use
B
to toggle between Direct Channel Access
and Bank Scanning.
6. Press
N
to toggle the Preprogrammed Search
Band. SRCH appears on the display.
7. Press
S
to start scanning all programmed channels
that are not locked out. (SCAN moves across the
display during scanning.)
8. Press
D
to turn ON or OFF the automatic 2-second
delay during scanning or searching for active
frequencies. (In Delay Mode, DLY appears on the
display.) In this mode, when the scanner monitors an
active frequency, searching or scanning will not resume
until transmission stops for 2 seconds.
9. There are 7 Preprogrammed NOAA weather
channels. Press
W
to find the active NOAA
weather channel in your area. WX appears on the
display in Weather Mode.
10. Press
L
to turn the display light ON for 15 seconds.
Press
L
again to manually turn the light OFF.
11. Press and hold until appears on the
display. This disables the keypad and prevents any
accidental key entries. To enable the keypad, press
and hold
until disappears from the display.
8
G:\Manuals7\Scanner\Sc150\test.vp
Tue Dec 23 17:15:28 1997
Color profile: Disabled
Composite Default screen