Racing Electronics SC150 - Manual (Page 9)

12. Use
.
to enter the decimal point when
programming a frequency into a channel. If you
make an entry error, press .
before the
E
key to
erase the entry, and start over.
13. Press
E
to store a displayed frequency into any
displayed channel.
14. Use
d
and
u
(SRCH/CH) to search in either the up
or down direction within a Band, or to go up or down
in frequency when Search is stopped.. In SCAN
HOLD Mode, use these keys to go up or down to the
next channel.
15. Press
O
to “Lock Out” or prevent scanning of the
displayed channel, including Priority Channels. (L/O
appears on the display.) To unlock a channel, press
O
again.
O
can be used in Scan or SEARCH
Modes.
16. While Scanning, press
P
to enter the PRIORITY
SCAN Mode. (PRI appears on the display.) While
Searching, press P
(TURBO) to toggle between
100 steps and 300 steps per second. (When in
TURBO SEARCH Mode, SRCH flashes on the
display.)
17. Use
A
to skip data signals and unmodulated
carriers when in SEARCH Mode. This feature is not
active in the Air Band.
9
C:...sc150om.vp
Wed Dec 17 10:05:26 1997
Color profile: Disabled
Composite Default screen