Alpine CDA-105 - Manual (Page 18)

16
-EN
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text”.
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Press VIEW repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 15).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press VIEW to
display or turn off the time.
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Visual Customizing, External Device,
etc., can be modified.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item,
and then press
/ENT.
(e.g. Select POWER IC)
BLUETOOTH IN *
1
ILLUMINATION LCD CONTRAST
DIMMER PLAY MODE SCROLL TYPE
TEXT SCROLL INT MUTE *
2
CLOCK ADJUST *
3
AUX+ SETUP AUX+ NAME *
4
AUX IN GAIN *
4
DIGITAL AUX D-AUX NAME *
5
AUX IN
AUX NAME * 6
CHANGER NAME POWER IC
LANGUAGE XM ADF *
7
GAME ALERT *
8
STATION CALL *
9
DIGITAL SEEK *
9
DEMO
BLUETOOTH IN
*
1
Displayed only when INT MUTE is OFF, and the mode is set to other
than BT AUDIO.
*
2
Displayed only when BLUETOOTH IN is OFF.
*
3
Refer to “Setting the Time” (page 7).
* 4 Displayed only when AUX+ SETUP is ON.
*
5
Displayed only when DIGITAL AUX is ON.
*
6
Displayed only when AUX IN is ON.
*
7
When XM is connected, refer to “Setting the Auxiliary Data Field
Display (XM only)” (page 22).
*
8
When SIRIUS is connected, refer to “Game Alert Setup” (page 20).
* 9 When HD Radio Tuner module is connected.
3
Turn the Rotary encoder to change the setting,
and then press
/ENT.
(e.g. Select POWER IC ON or POWER IC OFF)
4
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing /ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Rotary encoder SOURCE/
F/SETUP
BAND
/ENT /ESC