Sandvik Coromant Silent tools - users guide User Manual
Page 32
Advertising
32
Recommended chip form
Internal turning
Chip evacuation:
• Use a tool holder with
integrated coolant.
• Insert geometries that
give short and spiral
formed chips are
recommended.
• Consider alternative tool paths if chip formation
needs to be improved.
• Up side-down cutting units permit improved chip
evacuation.
• Increase coolant flow, redirect nozzles or utilize high
pressure coolant (HPC) to minimize re-cutting of the
chips.
• Ensure that there is enough room for the chips
between bar and hole. Otherwise, the tool can press
the chips onto the surface and damage the
component and the tool.
Advertising