Sandvik Coromant Heat resistant super alloys - Manual (Page 19)

17
Turning of heat resistant super alloys
Xcel allows productivity to be doubled in
nickel-based HRSA, through increased
cutting data and a longer-lasting tool life.
Result
Over 100 % productivity increase
Time in cut reduction: 8 min to 3.5 min
Data
Material: NIMONIC PE 16
Ring, diameter 650 mm
Cutting depth: 1.7 mm
Insert:
Feed:
Cutting speed:
Number of components/edge:
Competitor
Competitor
0.2 mm/r
32 m/min
1 piece
Xcel
CNMX 12 04 A2-SM
grade GC1005
0.3 mm/r
50 m/min
2 pieces