X Rockers 51483 - Manual (Page 10)

Answers to frequently asked questions are available at www.x-rocker.co.uk.
Use the Contact Us online form or call
+44(0)
1992 450333.
TROUBLE SHOOTING
-Unable to connect to game console-
Most gaming consoles are shipped from the manufacturers with an Audio / Video RCA cable.The A/V RCA cable has three
RCA plugs:a video plug(yellow)and two audio plugs(red and white).If your gaming console came with an A/V RCA cable.
please follow the instructions supplied by the manufacturer for setting it up and connecting it to the TV. Please note that
you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is properly connected to
your TV,please follow the diagram in the illustrated X Rocker Set-up guide to connect the gaming console to the X Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to the TV). You will quickly recognize if
your gaming console uses this type of cable.It connects the gaming console directly to the television and carries both the
audio and video signal over a single cable, If your gaming console uses a coaxial cable, you CAN NOT connect it directly to
the X Rocker. Instead,you must
Use an intermediary A/V device(such as a TV,VCR,DVD,TIVO,etc)
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the ‘Audio Out’ jack on the intermediary A/V device.
c. Follow diagram 2 in the X Rocker Set-up guide to connect the X Rocker to the intermediary A/V device and
finalize the setup.
If your gaming console is attached to an HD TV with an HDMI cable. You will need to connect the chair using either the
audio out jacks on the back of the TV or by plugging into the headphone jack on the front of the TV.
-Unable to hear any sound from the X Rocker-
1. Check to ensure that the power adapter is properly connected to the power jack(A8). When properly connected,the in
dicator light(A9)on the control panel should light up when the power switch(A7) is turned on. If the indicator light(A9)
does not light up, try to use another power outlet in your home. when the TX box is switched on(A14) for use in wireless
mode, the power indicator light on it’s front panel should also light up. If the light is not on,please try changing the
batteries in the TX.
2. Make sure the power unit is turned on and indicator light on the control panel is lit. If it is not, please press the power
switch on the control panel. When you use wireless mode, the power indicator light on the front panel of the TX box turns
green, if the light is not on, please turn on the power switch(A14)on the side. Check the BAND selector(A15) on the side
of the TX box and make sure the number selected is the same as the number selected on the BAND selector(A6)of the
control panel on the chair.For example, if the BAND selector on the TX box is on “1”
, make sure the BAND selector on the
control panel is also on”1”.
3. Once you have successfully completed1.and 2. Please review the X Rocker illustrated set-up guide. Double check all audio
connections. Finally, check that the volume on the hand remote is turned to an audible level on both the TV and the chair.