Ag Spray Equipment AG300-500RC - Manual (Page 5)

4
*NOTE: If spraying liquid nitrogen you will need to multiply the conversion factor w/ the gpa,
mph, & nozzle spacing.
Conversion Factor:
28% Nitrogen - 10.65 lbs. per gal. - 1.13
32% Nitrogen - 11.00 lbs. per gal. - 1.15
Example:
20gpa x 4mph x 20” x 1.13 = 1808 = .31gpm
5940
5940
When the GPM is determined, look down the GPM column on the tip chart & find that GPM w/
the tip that is in the booms. After finding the GPM look to see what pressure is needed for that
mph & gpa.
Boom Parts & Components
REGULAR BODIES – 30’, 36’ & 45’ are ½” TRIPLE BODY-ELBOW QJ363C-750-1-NY
18639-112-540 Body 18638-111-540 Body OPTION: QJ363C-750-2-NY ¾” TEE
30’ – 13 tees on 20” 30’ – 6 elbows on 20”
36’ – 15 tees on 20” 36’ – 10 elbows on 20”
36’ – 13 tees on 18” 36’ – 10 elbows on 18”
Nozzle body count will be the same on diaphragm bodies & triple bodies.
22251-311-500 ½” DIAP. ELBOW 50 mesh poly screen QJ Slotted-Cap
22252-312-500 ½” DIAP. TEE 8079-PP-50 25612-2-NYR
30’ – 19 on 20” 30’ – 19 on 20”
36’ – 23 on 20” 36’ – 23 on 20”
36’ – 25 on 18” 36’ – 25 on 20”
Diaphragm Bodies are ½” on 30’ & 36’, & diaphragm bodies are ¾” on 45’ & up.
Regular Bodies are ½” on 30’, 36’ & 45’ standard unless otherwise specified.
QJ111-1 - 1” quick jet square clamps
30’ – 19 clamps
36’ – 23 clamps on 20” spac.
36’ – 25 clamps on 18” spac.