EarthQuake Cinenova 7 - Manual (Page 10)

10
Cinénova Grande BR Bridging Feature Earthquake Sound
MONO MASTER SLAVE MASTER SLAVE
Bridging Cinénova Grande BR 5 Channel to 3 Channels
Applications
The Cinénova Grande BR 5 Channel has four
channels that can be bridged to create two channels.
The fifth channel is always a stereo channel and
should always be set to “MASTER” since it has no
slave.
In order to bridge the first and second channel, the
first channel must be set to “MASTER” and the
second channel must be set to “SLAVE.”
To bridge the third and fourth channel, the third
channel must be set to “MASTER” and the fourth
channel must be set to “SLAVE.”
Bridging 5 channels to 3 channels as shown in the
diagram to the right is perfect for front stage or back
stage systems.
Minimum 8-Ohm Minimum 8-Ohm
Minimum 4-Ohm
specifications are subject to change without notice