EarthQuake Titan Telesto - Manual (Page 7)

Telesto Manual 6
Telesto Driver Units
Telesto Manual 5 Earthquake Sound Corp. | (800) 576-7944 | www.earthquakesound.com
arthquake Sound presents its next creation from allows the sound to travel in tubular shaped spheres. E
the TITAN series, the Telesto towers.
In an array type design, SPL losses due to the distance
Their sleek, slim exteriors are matched only by their between the speakers and the listeners are 4 times lower
performance. The main Telesto cabinets are built than conventional design. The dual carbon fiber drivers
from multi-laminations of steam bent, high density are fast, neutral, and voice tuned.
fiber board. These laminations offer extreme rigidity
as well as lower cabinet vibrations. These single
pieces of egg shaped walls offer minimum wall
reflections and allow the cabinets to be transparent,
dynamic, and neutral.
To maximize floor coupling in low frequencies, the
Telestos are equipped with XLT EQ8 extra long
excursion subwoofers that create tight, fast, and
accurate low frequency extension. The EQ8’s are
mounted 90º off-axis from the front of the speakers.
This allows for a slim profile while delivering massive
bass response. With a name like Earthquake,
audiophiles tend to expect more, and the Telesto
delivers.
The mid-band of the Telestos are equipped with an
array of type loaded two 4” Kevlar drivers. The array
type design calls for identically designed stacked
As AV front speakers or a conventional stereo system, the
speakers to play into the room. The array shares the Telestos will deliver a benchmark in performance and
three dimensional space in front of the speakers, this style that is unprecedented.
The Telestos are crowned with two conically shaped
epoxy cabinets that harbor the T1 tweeter and the M2
midrange. The T1 and M2 are placed at about 3 feet
elevation from the base. This allows the speaker to
produce linear response that is not obstructed by furniture
and that is more direct to a sitting listener. The M2 is a
1.25” super midrange that delivers upper mids, and the T1
is a 1” silk dome with a Neo motor structure.
The design of the T1 tweeter module on top of the cabinet
in a separate enclosure achieves perfect positioning for
wider dispersion and better image stability. The T1 is
tuned to allow correct phase integration with M2, the
midrange driver. The enclosure designs are optimized to
deliver the ultimate in sound quality. Each Telesto is voice
tuned to deliver a transparent performance.
Telesto Design
T1: 1” silk dome, NEO super tweeter.
Frequency range: 3KHz-35KHz.
Fo=2.1KHz.
M2: 1.25” silk dome, compression tweeter,
phase correction, horn loaded.
Frequency range: 1.4KHz-10KHz.
Fo=1.25KHz.
M4: Dual 4” Kevlar midrange, Long
Excursion.
Frequency range: 100Hz-2KHz.
Fo=130Hz.
EQ-8 XLT: fiberglass cone midbass,
8” black fiberglass cone side woofer.
Frequency range: 30Hz-150Hz.
Fo=28Hz.
Room Setup Options
RIGHT
0° 0°
LEFT
RIGHT
LEFT
(Side Subwoofers face outwards, toward the wall.)
Specifications are subject to change without notice.
= Subwoofer Sound Wave
= Speaker Sound Wave