Aprilaire 8600 - Manual (Page 7)

7
press [MENU] to enter the main menu .
press [ClEAN SCREEN] to disable the touch screen
for 30 seconds for cleaning .
Note: Use a soft damp cloth to clean the screen . Use
water or household glass cleaner. Do not spray liquids
directly on the screen .
ClEAN SCREEN SElECT fAN SETTING (ON/AUTO/CIRC)
press [fAN] to select:
ON: Fan runs continuously. use this mode for maximum
air circulation/filtering .
AUTO: Fan runs only when the heating or cooling
system is on .
CIRC: same as AuTo, but ensures the fan is on for at
least 20 minutes per hour . Use this mode for a balance
of energy savings and air circulation/cleaning .
press [DONE] to save and exit, or [CANCEl] to exit
without saving . The thermostat will save and exit if
nothing is pressed within 10 seconds .
OpERATION
When the fan mode is changed during a program event
it remains in that mode until the next event starts . The
fan must be programmed to FAn on in the schedule to
run continuously through all events .
MAINTENANCE REMINDERS
Maintenance reminders are set up by the installer to
indicate when the equipment is due for service. if a
maintenance reminder is displayed, call your HVAC
dealer for service . They can be cleared by pressing
[MENU] to enter the main menu, then [Next] to clear
each reminder .
SCREEN lOCKOUT
The user can disable certain features of the thermostat .
(See User System Setting Table on page 18 for details .)
This feature can be overridden by pressing and holding
[MENU] for 7 seconds .
61000728A 8600 Tstat Owners.indd 7 10/7/10 11:44:55 AM