Vaisala Setting up Digi Connect Wi-SP or ConnectPort TS W Devices with viewLinc - Manual (Page 12)

Page 12 of 12
V e r i t e q , a V a i s a l a c o m p a n y T e l 6 0 4 2 7 3 6 8 5 0
1 3 7 7 5 C o m m e r c e P a r k w a y 1 8 0 0 6 8 3 8 3 7 4 ( N o r t h A m e r i c a )
R i c h m o n d , B C , C a n a d a , V 6 V 2 V 4 F a x 6 0 4 2 7 3 2 8 7 4
w w w . v e r i t e q . c o m | w w w . v a i s a l a . c o m c u s t o m e r s u p p o r t @ v e r i t e q . c o m
Command Syntax
The command syntax follows these conventions:
• Text
in italics needs to be replaced by information specific to your network.
• Square brackets [ ] surround optional items.
• Items separated by commas allow more than one option at a time.
• Braces { } surround entries that require you to choose only one of several options, which are
separated by the vertical bar |.
• For example, choose any combination of options for “set wlan encryption”, but choose either “64bit” or
“128bit” when setting “set wlan wepmode”.
• Do not include any braces or square brackets when entering commands.
set network [if=interface] [ip=ip_address] [submask=subnet_mask]
[gateway=gateway_addr] [static={on|off}] [dhcp={on|off}] [autoip={on|off}]
set wlan protmode={bss|ibss_create|ibss_join|any}
set wlan channel={0|1-14}
set wlan ssid=string
set wlan authentication=[open],[sharedkey],[wep_auth],[wpa_psk],[wpa_auth],
[leap],[any]
set wlan encryption=[open],[wep],[tkip],[ccmp],[any]
set wlan outer_eap=[peap],[tls],[ttls],[any]
set wlan inner_eap=[gtc],[md5],[mschapv2],[otp],[chap],[mschap],
[ttls_mschapv2],[pap],[any]
set wlan options=[diversity],[short_preamble],[verify_cert]
set wlan username=string
set wlan password=string
set wlan psk=string
set wlan wepmode={64bit|128bit}
set wlan wepindex={1|2|3|4}
set wlan wepkeyN=hex_string (N=wepindex)
set wlan country=string
set wlan maxtxrate={1|2|5.5|11} (Mbps)
set wlan txpower={6|8|10|12|14|16} (dBm)
boot action={reset|factory}
show network (to confirm the network settings)
show wlan (to confirm the wlan settings)
Copyright © 2010 Veriteq Instruments, Inc. All rights reserved.
Document Number: 880-0324-00
Release Date: August 2010