HighPoint RocketRAID 2782 - Manual (Page 16)

RocketRAID BIOS Utility
16
1. Use the arrow keys to select the RAID level and press ENTER.
2. Use the arrow keys to highlight the Array Name option and press Enter.
The array name dialogue box will appear. Use the keyboard to input a
new Array Name, and press the Enter key.
Note: the Array Name command is optional – it is not necessary to name the
array. The array can be named at a later time, and the name of the array can
be changed at any time.
3. On the Create menu, use the arrow keys to highlight the Select Devices
item and press Enter. A device list will appear, and display all available
hard disk drives.
4. Highlight the target disks that you want to use, and press Enter to select
them. You can use the arrow keys to select from the next set of disks