HighPoint RocketRAID 4460 - Manual (Page 11)

Hardware – Description and Installation
Hardware - Description and Installation
1-RocketRAID Adapter layout
11
Port1 to Port6
These represent RocketRAID 4460’s 6 Internal Mini-SAS ports. Each port can direct
connect up to 4 hard drives.
Port7
This represents RocketRAID 4460’s additional External Mini-SAS port. With the
automatic port selection funtion, Port7 can be used when Port1 has no disks attached
during power up,this port can direct connect up to 4 hard drives.
Note : Only Port1(/Port7) and Port2 support SAS expander.
U12
The connector represents one DDR2-533 DIMM socket that allows for upgrading up
to 4GB of memory. By default,it supports 1GB of ECC DDR533 SDRAM memory.
A1-A6, F1-F6
A1-A6 are Disk Activity LED’s; F1-F6 are Disk Faliture LED’s.