HighPoint RocketRAID 3510 - Manual (Page 38)

Web RAID Management Interface
5-1
1 Web RAID Management Interface
Note: To use the web-based RAID management interface, a web browser with XML
support is required, e.g. Internet Explorer 6.0+, Mozilla, FireFox, or Safari (for OSX
systems).
Starting the Management Interface
To run the management interface, start the web browser and enter the following URL
address:
https://localhost:7402
If you are managing a remote system please change “localhost” to the server’s host
name or IP address.
The default user name is “RAID” and the initial password is “hpt”. You can change
the password after you have logged in.
Notes:
1) The login information is saved in /etc/hptuser.dat. If you forget the password you
can remove this file to reset the password.
2) If you can’t connect to the local system, please check and make sure a process
named hptsvr is running. If hptsvr is not running, you can start it manually by using
the following command (from a terminal window)
/Library/StartupItems/Hptsvr/hptsvr
3) If you can’t connect to a remote system, make sure hptsvr is running on that
system (and can access the remote system via TCP/IP connection). If you have a
firewall configured, make sure TCP port 7402 is not blocked.
Uninstalling (Mac OSX only)
To uninstall the driver and management software, double click the “ rr3xxx.dmg ” file.
1) Locate and double click the “ uninstall.command ” file.
2) This will initiate the uninstall script, and will open a Terminal window. Enter the
administrator password when prompted, to delete the installed files.