HighPoint RocketRAID 3510 - Manual (Page 77)

Mac OSX Driver
8-2
6) You will then be notified that a reboot is needed to install the software. Click
“Continue Installation”.
7) The driver will then be installed into the system. Click “Restart” to restart the
system.
After the system restarts, you can use a web browser to configure the controller and
setup RAID arrays. Use the MacOSX Disk Utility to create partitions the RAID
arrays.
Web RAID Management Utility
Please refer to page 5-1 – the Web utility utilizes a universal interface, and operates in
the same manner as revisions released for other operating systems.