1 installing the driver and raid utility – HighPoint RocketRAID 2522 User Manual
Page 73

1 Installing the driver and RAID utility
Installing the package
1)
Double click the package labeled “rr2522-mac-v10-070407.dmg” to start the
installation process (“xxx” refers to the revision of the driver). This will open
the driver and software packag.
2)
Double click the “rr2522_00-MacOSX-universal-vxxx.dmg” file to start the
installer:
3)
When the Installer window opens, click the “Continue” button.
4)
The installer will ask you to select a destination for the driver. Make sure to
select the boot Volume - the driver must be installed to /System/Library/Exten-
sions/ folder in order to function properly.
5)
Click the “Install” button.
You will be prompted: “clicking the install button will install a basic installation of
the software package on your selected volume”. Confirm the prompt to install
the software package.
Mac OSX Driver and RAID Management Software
7-1