HighPoint RocketRAID 2340 - Manual (Page 13)

RocketRAID 2340 Hardware Description/Installation
2-3
3 - Installing the RocketRAID 2340 Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 2340
host adapter.
1. Open the system chassis and locate an unused PCI-Express slot.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID 2340 into the PCI-Express slot, and secure the
bracket to the system chassis.
4. After installing the adapter, attach the Mini-SAS connectors to the RocketRAID
2340’s Mini-SAS ports, and to chassis backplane. Each Mini-SAS cable sup-
ports up to 4 hard disk drives. Consult the chassis’s manual for proper installa-
tion procedures.
5. Close and secure the system chassis.