HighPoint RocketRAID 2340 - Manual (Page 29)

RocketRAID 2340 Driver and Software Installation
4-5
Logging On
The RAID Management Console requires that a user (or Administrator) log on.
The software is incapable of working with RAID arrays or hard disks attached to the
RocketRAID 2340 until the user has logged on.
Default Parameters:
System Address: 127.0.0.1
Port: 7402
User Name: RAID
Password: hpt
Note: The password and user name fields are case sensitive.
The first time the software is used, make sure to enter the information listed above.
After successfully logging on, the software will ask you to alter the password (as a
security precaution).
Enter a password, and press enter.
2 - Software Interface - Overview of commands/functions
After logging on, several new options will become available.
These commands are displayed towards the top of the interface window: