Aiwa XD-AX10 - Manual (Page 42)

C:\WINNT\Profiles\Administrator\My
Documents\XD-AX10_GB\01US09ADV1-
CEK.fm master page=left
XD-AX10
3-081-707-11(1)
42
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Notes
• If “DTS” is set to “OFF” in “AUDIO SETUP,”
the DTS track selection option will not appear on
the screen even if the disc contains DTS tracks
(page 54).
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
when you select “2:STEREO,” “2:1/L,” or
“2:2/R.”
Virtual Surround Settings
When you connect a stereo TV or 2 front
speakers, Virtual Surround lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL) jack, the
surround effect will only be heard when
“DOLBY DIGITAL” is set to “D-PCM”
(page 54).
1
Press SUR during playback.
The following display appears.
2
Press SUR repeatedly to select
one of the Virtual Surround
sounds.
Refer to the following explanations given
for each item.
• WIDE
• NIGHT
SUR
WIDE
01US01COV.book Page 42 Thursday, December 5, 2002 6:23 PM