Aiwa XD-AX10 - Manual (Page 59)

C:\WINNT\Profiles\Administrator\My
Documents\XD-AX10_GB\01US13ADD-
CEK.fm master page=right
XD-AX10
3-081-707-11(1)
59
Additional Infor
m
ation
Specifications
System
Laser: Semiconductor laser
Signal format system: NTSC
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT (L/R) AUDIO jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO)
jacks are measured. When you play PCM
sound tracks with a 96 kHz sampling
frequency, the output signals from the
DIGITAL OUT ( COAXIAL) jack are
converted to 48 kHz sampling frequency.
Outputs/Inputs
(Jack name: Jack type/Output or Input level/
Load impedance)
LINE OUT (AUDIO): Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
B
, P
R
):
Phono jack/Y: 1.0 Vp-p/P
B
, P
R
:
0.65 Vp-p/75 ohms
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
General
Power requirements:
120 V AC, 60 Hz
110 to 240 V AC, 50/60 Hz
See page 3 for further information.
Power consumption: 13 W
Dimensions (approx.): 430
Ч55.5 Ч
234 mm (17
Ч 2
3 /
16
Ч 9
1 /
4
in.) (width/
height/depth) incl. projecting parts
Mass (approx.): 2.2 kg (4 lb 14 oz)
Operating temperature: 5
°C to 35 °C
(41
°
F to 95
°
F)
Operating humidity: 25 % to 80 %
Supplied accessories
See page 15.
Specifications and design are subject to
change without notice.
E
NERGY
S
TAR R is a U.S. registered mark.
As an
E
NERGY
S
TAR R Partner, Sony
Corporation has determined that this product
meets the
E
NERGY
S
TAR R guidelines for
energy efficiency.
01US01COV.book Page 59 Thursday, December 5, 2002 6:23 PM