ARI Armaturen ARI-PACO 0,85kN EN - Manual (Page 12)

Page 12 0040506000 1811
Operating and installation instructions
Electric thrust actuator ARI-PACO 0,85 kN
5.4 Electrical connection
5.4.1 Wiring diagram ARI-PACO 0,85 D
Fig. 6
5.4.2 Wiring diagram ARI-PACO 0,85 Y
Fig. 7
DE Torque swittch
POT Potentiometer
ME Magnet switch
M Motor
C Capacitor
Standard Accessories
DE Torque swittch
POT Potentiometer
ME Magnet switch
M Motor
C Capacitor
D Diode
Standard Accessories
2. Function
(message switch)
no error error
With input signals 0/2-10 V a bridge, connecting the terminals 1 and M, has
to be installed. In case of a three-step controller signal the bridge is not
required. A signal at the terminals 2 and 3 e.g. from an anti-freezing
contact has always priority over the input signal.
For automatic operation, a jumper 1 / M must be installed, the priority
switching is preserved
1. Function