CDN DTP482 - Programmable Probe Thermometer/Timer EN - Manual

Perfect For
• Roasts & other meats
• Oven and barbecue
• Candy making & deep fry
Easy To Use
• Pre-programmed & programmable settings
for different meats & temperature/tastes
• Instant readout of internal food temperature
during cooking
• Alert sounds when food is done
Features
• 5.5"/14.0 cm probe
• 3'/91.4 cm sensor cable
• High heat
• Pre-programmed & programmable
• Dual progress display
• Counts up & down
• Alarm
• ABS plastic case
• Stainless steel probe
• Sliding mode switch
• Temperature guide
• 3-way mounting: magnet/stand/hang
• Adjustable stainless steel clip
• Battery and instructions included
Get Professional Results
Every Time!
Pre-Programmed Mode
Perfect for roasting or grilling. Choose the type of
meat or poultry and the doneness desired. The unit
has been pre-programmed with 6 meat/poultry
choices and various doneness temperatures. The
pre-programmed temperatures are based on USDA
safe cooking temperatures. The TASTE mode will
not allow the user to undercook when it is not safe
to do so. Both the taste chosen and the temperature
will be displayed during cooking. Simply insert the
probe into the food. Place the food in the oven or
barbecue and close the oven door (or grill cover)
directly over the probe cable.
Alert Mode
This feature allows the user to set a desired
cooking temperature. This is perfect when the user
prefers a different temperature than has been
pre-programmed. For candy or deep frying, attach
the stainless steel clip to the saucepan edge and
insert the probe into the mixture. Set the desired
internal food temperature using the ALERT mode,
then wait for the alarm to indicate when the cooking
is done. It’s that easy. Complete instructions with
candy and oil temperature guides are included.
The control module can sit on a counter top or the
magnet can attach to a convenient surface. DO NOT
attach to a hot barbecue. The plastic case will melt.
In MEAT mode, the cooking temperature is
continuously displayed along with the set
temperature, type of meat and taste preference.
When using the TIMER mode, the time counting up
or down is shown at the top of the module.
It counts down or up by minutes. The timer alarms
for 60 seconds when the set time is reached.
Note: Remove sticker from display before use.
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Model: DTP482
Programmable
Probe Thermometer/Timer
32 to 482°F/0 to 250°C
Counts 24 hours by minutes