Removing the lcd brackets, Removing the lcd coaxial cable – Aspire Digital 1620 User Manual
Page 70
61
Chapter 3
Removing the LCD Brackets
1.
See “Removing the Battery” on page 52.
2.
See “Removing the Middle Cover” on page 56.
3.
See “Removing the Launch Board” on page 56.
4.
See “Removing the LCD Module” on page 57.
5.
See “Removing the LCD Bezel” on page 59.
6.
See “Removing the Inverter Board (15” LCD)” on page 59.
7.
See “Removing the 15” TFT LCD” on page 60.
8.
Remove the four screws holding the right LCD bracket.Then remove the right bracket.
9.
Remove the four screws holding the left LCD bracket. Then remove the left bracket..
Removing the LCD Coaxial Cable
1.
See “Removing the Battery” on page 52.
2.
See “Removing the Middle Cover” on page 56.
3.
See “Removing the Launch Board” on page 56.
4.
See “Removing the LCD Module” on page 57.
5.
See “Removing the LCD Bezel” on page 59.
6.
See “Removing the Inverter Board (15” LCD)” on page 59.
7.
See “Removing the 15” TFT LCD” on page 60.
8.
Tear off the mylar fastening the LCD coaxial cable, then disconnect the coaxial cable.