Avocent KVM over IP switch - Manual (Page 30)

8/16 PS/2 KVM over IP switch
27
Warning
Please make sure to change the super user password immediately after you have
installed and accessed your PS/2 IP-KVM switch for the first time. Not changing the
pass phrase for the super user is a severe security risk and might result in
unauthorized access to the PS/2 IP-KVM switch and to the host system including all
possible consequences!
Warning
Your web browser has to accept cookies, or else login is not possible.
Navigation
Having logged into the PS/2 IP-KVM switch successfully, the main page of the PS/2 IP-KVM
switch appears (see Figure 5-4). This page consists of three parts; each of them contains
specific information. The buttons on the upper side allow you to navigate within the front end
(see Table 5-2 for details). The lower left frame contains a navigation bar and allows you to
switch between the different sections of the PS/2 IP-KVM switch. Within the right frame,
task-specific information is displayed that depends on the section you have chosen before.
Figure 5-4. Main page
Return to the main page of the PS/2
IP-KVM switch .
Open the PS/2 IP-KVM switch remote
console.
Exit from the PS/2 IP-KVM switch front end.
Table 5-2. Buttons from the front end