High Country Tek HGC-2, Closed Loop Controller - Manual (Page 11)

Hydraulic Generator Controller – HGC-2
11
‘Unit’ Menu Options :
The ‘Unit’ menus has three drop down options:
1.
Read Parameters.
2. Send parameters.
3. Find Controller.
‘ Read Parameters ’ Selecting this option
allows the GUI to read the parameter
setting file from a connected controller to
allow backup, editing or copying to other
controllers.
‘ Send Parameters ’ This option sends all
the parameters currently shown on the
screen down to the controllers permanent
memory to become the settings used from
this point forward.
‘ Find Controller ’ This option will actively search communications ports for a genuine HGC controller and
then refresh the parameter screen with the settings in that found module
60 or 50Hz Screen Differences :
The HGC-2 controller is designed to cater for global markets and
as such, can manage both 110VAC and 240VAC generator
outputs at either 50 or 60Hz.
The line ( high voltage ) feedback is taken directly from the
generator secondary with NO other external equipment or
components needed.
The easy to use Graphical User Interface (GUI) allows the user to
select feedback voltage as well as frequency with the GUI meters
and displays changing to ensure that the user is always presented
with the best resolution graphics that will allow
File Help Password Quit