High Country Tek HGC-2, Closed Loop Controller - Manual (Page 23)

Hydraulic Generator Controller – HGC-2
23
HGC-2 Ordering Information:
HGC-2 Connector Kit:
HGC-2 Programming Cable:
Output Current Range:
06 - 600mA current range
12 - 1200mA current range
25 - 2500mA current range
Notes:
•The current range chosen represents the maximum current available at the controller output.
• See rear of controller for part number and model number
H G C 2 - 1 2
8 way Metri-Pack 150 series MALE connector
Note:-
Mating connector gender:- 8 way Female
( Socket ) kit complete with pins and separator.
Correct crimp tool must be used, contact HCT
sales and service for more information
The programming cable is USB compatible and requires 5VDC power from
the USB port to operate.
The programming method is infra-red and will only work when the head is
securely mounted to the HGC-2 controller. The head is a tight
‘push-fit’
using the two screw-heads either side of the Deutsch connector for
location. The head should be mounted with the
‘BLACK’ side downwards
facing the controller, ensuring that it is fully pushed home.
Order P/No.: 999-10073
Order P/No.: 999-10166