VariZoom VZCINEMAPRO-JR-K5 - Manual (Page 11)

(supplied). Now fix the support arm to the interface plate using the supplied thumbscrews,
lockwashers, and flat washers. Put the flat washers between the support arm and the lockwashers to
prevent scratching. Tighten the thumbscrews thoroughly.
(2) Now attach the square weight to the support arm, using the same type of thumbscrews, lockwashers
and washers. Tighten the thumbscrews
thoroughly.
The counterweight adds about 7 lbs total
weight to the system, so if you don’t need it, try
operating without it first. Also note that some
swaying may be caused by the camera platform being
out of vertical balance – remedy this by
adjusting the camera platform up or down so the
camera’s center of mass is on the center of tilt
rotation.
Appendix
24VDC Power Supply Connector
1) Power Supply Connector – XLR 4-pin Female
Pin Function Wire Color
1 N.C.
2 CP JR Neg. Black & Green
3 CP JR Pos. White & Red
4 N.C.
* 2) Optional XLR Y-adapter for running head AND camera power through single XLR extension
Y-1 “Camera” Power Input Male XLR Connector
Pin Function
1 Camera Neg.