VariZoom VZCINEMAPRO-JR-K5 - Manual (Page 6)

Joystick deadband
After all connections have been made and the camera is balanced, the head is ready to be powered up.
Connect the power supply to AC power. Plug in the green communication connector to the head, and
the other end to the jibstick. The jibstick should now power up. Once the Sync light is illuminated, you
may then turn on the motor power switch.
2. Jibstick layout and functions
Pan Speed
Pan direction
Communication Connector
Tilt direction
Tilt Speed
Smoothing
Pan/Tilt
Control joystick