Digital recorder – Videoswitch Vi100 User Manual
Page 26
Digital Recorder
22
9.4.3 Camera
Inputs
9.4.3.1 Record
Brightness
The brightness of the images being recorded can be adjusted to compensate for cable
losses. Adjust the brightness as required for each camera.
• If the displayed image (which is digitised) is too dim or is tearing, increase the
brightness setting.
• If an image is too bright, decrease the brightness setting.
9.4.3.2
Record Colour Boost
The colour content of the images being recorded can be adjusted here to compensate for
cable losses. Adjust so that the colour content of the displayed image is not too weak or too
strong.
9.4.4
Restore Factory Config
Press the
YES key to restore the configuration to the factory defaults.
9.4.5
Erase Hard Drive
Press the
YES key to erase the hard drive.