Videoswitch Vi100 - Manual (Page 7)

Digital Recorder
3
Connect the mains power using main cable provided
1.2 Setting Date/Time
For proper operation of the Vi100 Digital Recorder it is essential that the date and
time are set correctly.
If the system clock has an invalid date or time when the Vi100 is powered up (or at any time
during operation), the date and time setting window will be automatically displayed
If this occurs, use the number keys to enter the date and time.
1
4
7
2
5
8
0
3
6
9
The arrow keys may be used to move the cursor to different positions if only some digits
need changing:
Н
Н
Press OK to finish:
OK
If you need to adjust the time and date at any other time, refer to section 9.1. Note that the
time is automatically adjusted forwards or backwards by an hour at the appropriate dates to
take account of British Summertime so no user action is required.
The format for the date and time is DD/MM/YY HH:MM:SS
where:
• DD is the day of the month (00 to 31),
• MM is the month (01 to 12),
• YY is the year (e.g. 04 for the year 2004),
• HH is the hour in 24-hour format (00 to 23),
• MM is the number of minutes past the hour (00 to
59) and
• SS is the number of seconds past the minute (00 to
59).