Videoswitch Vi-POSCON - Manual (Page 3)

Vi-POSCON System User's Guide Pos603a.doc
3 of 28
CAUTIONS
CAUTION: For continued protection against
risk of fire, replace only with the same type and
rating of fuse.
CAUTION: Danger if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of
batteries according to the manufacturer's
instructions.
IMPORTANT!
PLEASE READ CAREFULLY AND SAVE
PURCHASERS WHO INSTALL THIS DEVICE
FOR USE BY OTHERS MUST LEAVE THIS
DOCUMENT WITH THE USER.
PRECAUTIONS: Check that the operating
voltage as indicated on the type plate [label] of
the Power Supply Unit [PSU] is identical with
the voltage of your local mains power supply.
LOCATION: For pluggable equipment [which is
the PSU], the socket outlet shall be installed
near the equipment, [the PSU], and shall be
easily accessible.
Do not expose the VI-POSCON or the PSU to
humidity, rain or excessive heat; they are for
use in dry areas only.
SAFETY: The Mains Plug is considered to be
the means of disconnecting primary power. To
isolate the equipment fully, ensure that the
Mains Plug is removed.
All Video, Data and Alarm switching signal
connections must be to SELV* levels only, in
accordance with EN 6095 and UL 1950 3
rd
Edition.
INSTALLATION: Both the VI-POSCON and
the PSU are designed to be free standing on a
horizontal surface.
NOTES:
*SELV = Safety Extra Low Voltage.
PSU = Power Supply Unit.
About this Guide
This VI-POSCON User's Guide provides the
information you need to set up and use your VI-
POSCON System. It describes the VI-
POSCON features and explains, step-by-step,
the tasks you will perform when using the VI-
POSCON System. It also serves as a
continuing reference as you use your VI-
POSCON System.
The guide is written to help you use VI-
POSCON to monitor electronic point-of-sale
(cash register) activity at a store. It does not
assume that you are an experienced computer
operator.
After reading this guide, you will be able to set
up the VI-POSCON System, use the system to
document activity throughout the store, and
review that activity at your leisure.
Changes from Prior Version
(Revision bars in margins identify significant
changes.)
•
Remove all references to User Event.
Text Conventions
This guide uses text in different ways to identify
different kinds of information.
Italics
Used for terms that are
specific to VI-POSCON and
for text that requires
emphasis; also used for
document titles.
Monospace
and
monospace Used for names of windows
and menus, and any
information that appears on a
window.
Note A note calls attention to any
item of information that may
be of special importance.
Related Documents
Other documents that provide information
about VI-POSCON.
• The
VI-POSCON Installation Guide (IDB-
1594-01), provides detailed procedures for
installing, configuring, and troubleshooting
your VI-POSCON System
Ordering Documents
If you need additional copies of the VI-
POSCON User's Guide, or any other document
that will help you use your VI-POSCON Plus
System, contact your local Sales
Representative.
The document number for this guide is:
Pos603a.doc
If you need assistance, call…
• Videoswitch Tel: 01252-851510
• Videoswitch Fax: 01252-851296
•
Videoswitch Email: [email protected]