Triton TritonMap User Manual
Page 18
June 2004 DelphMap™ User's Manual
FIGURE 2. Modify, Repair, Remove choices during installation
You will need to remove the old version of the software before you will be
permitted to install the new version. To do so, enable the Remove button in the
dialog box and click Next. You can then install the new version by rerunning
setup.exe. As noted above, some items are deliberately not removed during the
uninstall process; doing so can cause problems. If necessary, manually delete
the \TEIdlls folder, but only do this if you are going to re-install all TEI
applications.
Important Note: The Windows Installer will fail to uninstall the software if the
operating system has been upgraded from (for example) Windows 98 to
Windows 2000 after the TEI applications were installed. If you want to upgrade
your operating system, uninstall the TEI programs first, and then re-install the TEI
programs after the upgrade.
Chapter 1: Getting Started with DelphMap
4