Triton Bathymetry - Manual (Page 29)

Page 25
For adjusting the color of an individual
grid layer, right click on the layer name
in the file tree. The example shown
right is for opening the
Density color
settings.
Selecting the Color Settings for any layer will open
the window shown to the right. Apart from changing
the color bar as shown in the window below, increasing
the
Gamma can help bring out the details in the grid.
6.2 Histogram
Changing the histogram adjusts how the color map is spread across the data range. The
Histogram is accessed the same as the Color Settings by right-click root bathymetry file
tree nodes or on the individual grid layer.
Selecting the Histogram menu option will open the window below. With the Histogram
stretched to the full range of the data, the bathymetry image is mostly one color.