Dake Model TB-16 - Manual (Page 11)

10
Table handle
Table tilting adjustment:
Using an adjustable or box wrench
loosen table level lock bolt. Carefully tilt
the table to the degree needed, as read
on the angle index scale located on the
table rotation point. Retighten nut
securely.
Note: Never tilt table if any material or
fixturing is on it. Only make adjustments
when table is free of loose articles.
Table swing adjustment:
To swing the table up to 360 degrees,
loosen the clamp release bolt and swing
table to the desired position. After the
table is in the correct position tighten
clamp release bolt securely.
Note: Never swing table if any material or
fixturing is on it. Only make adjustments
when table is free of loose articles.
Feed depth adjustment:
Setting the feed depth adjustment is
done by loosening the clamp bolt on the
spindle depth index sleeve and rotating
it to the desired depth.
Retighten clamp bolt securely.
Note: Never make this or other
adjustments when machine is running.