AquaStar Starztruck Automatic Suction Pool Cleaner - Manual (Page 13)

11
starztruck automatic pool cleaner service tips
Bottom of cleaner (concrete)
Fig. 17
Slots
Captive
screw
Fixed access
cover
Bottom of cleaner (vinyl)
Fig. 18
Captive
screw
Fixed access
cover
Slots
Turbine/vacuum chamber
Fig. 19
bottom openinG removal and cleaninG instructions
removinG the bottom openinG
Should the StarzTruck automatic pool cleaner stop moving or become sluggish due to debris trapped in the
throat or inside the unit, the turbine/vacuum chamber is accessible following these instructions.
1. Turn off pump.
2. Remove StarzTruck automatic pool cleaner from pool.
3. Disconnect StarzTruck automatic pool cleaner from leader hose.
4. Turn StarzTruck automatic pool cleaner upside down.
5. Locate and loosen the captive screw behind the
throat in the center of the bottom (see Figs. 17 & 18).
6. Lift bottom opening (see Figs. 17 & 18).
7. Clean turbine/vacuum chamber (see Fig. 19).
8. Check turbine for free movement.
9. Reinstall bottom opening by lining up the fixed access
cover with the two slots shown in Figs. 17 & 18.
Slide the cover in place and tighten the captive screw.
10. Reinstall StarzTruck automatic pool cleaner in pool per
installation instructions.