Kenwood KDV-U4349 - Manual (Page 35)

English | 35
P.CONT
ANT.
CONT
R L
MUTE
PRK SW
VIDEO OUT
Connecting Wires to Terminals
Battery
Black (Ground wire) - (To car chassis)
FM/AM antenna input
Yellow (Visual output)
Fuse (10A)
Wiring harness
(Accessory1)
Red (Ignition wire)
Yellow (Battery wire)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
To Kenwood disc changer/ External optional accessory
⁄
To connect these leads, refer to the relevant instruction manuals.
For the sake of safety, be sure to
connect the parking sensor.
⁄
Connect to the vehicle’s
parking brake detection
switch harness.
Brown
Blue/White
(Power control/ Antenna control wire) Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
AUX input (Stereo)
Use the mini-plug cable which is
stereo type and does not have any
resistance.
USB connector
Rear output/ Sub Woofer output/
AV output (audio)
Light Green (Parking sensor wire)
Front side
Blue
(Antenna control wire)
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film or short pole-type antenna.
Light Green
(Extension cable: Accessory3)
Not used.
$AA/A'PINKUJKPFF